Omcan DB-25HD, Instruction Manual

Page: 5 / 20

5
Safety and Warranty
the instructions and that you understand all information contained in this manual. If you have any questions,
contact your nearest dealer.
DANGER
An electric cable or electric wire with a damaged jacket or bad insulation could cause electrical shocks as well
as electrical leaks. Before using the equipment, check conditions of all wires and cables.
RECOMMENDATIONS
Be sure ALL instructions in this manual have been thoroughly read and understood. Every function and
operational procedure has to be understood by the operator. Any manual command (switch, button or lever)
shall be given only after being sure it is the correct one.
PRECAUTIONS
The electric cable has to be compatible with the power required by the machine. Cables touching the floor or
close to the machine need to be protected against short circuiting.
ROUTINE INSPECTION
RECOMMENDATIONS
When checking the tension of the belts or chains, DO NOT introduce your fingers between the belts, pulleys,
chain and gears.
PRECAUTIONS
Check the motor and turning or sliding parts of the machine, in case of abnormal noises. Check the tension
of the belts and chains and replace the set when belt, chain or gears show signs of being worn out. When
checking tension belts or chain, DO NOT introduce your fingers between belts, pulleys, chains and gears.
Check protections and safety devices to make sure they are working properly.
Technical Specifications
Technical Characteristics DB-25HD
Voltage (V) 110 or 220
Power Rating (CV) 1
Consumption (kW/h) 0.73
Height / Width / Depth (mm) 1160 × 550 × 670
Net/Gross Weight (Kg) 45/53
Capacity (Kg) 25
Average Production (Kg/h) 500