5
Safety and Warranty
comply with the precautions, warnings and recommendations in this manual will nullify your warranty and
may result in injury or even death.
4. ALWAYS ensure that this hot dog roller is plugged into a grounded outlet with the proper power supply
available.
5. DO NOT unplug the machine by pulling or tugging on the power cord. Firmly grasp the plug and remove
from outlet.
6. MAKE SURE that the power outlet, plug and power cords used are in good condition. Worn, frayed
or damaged plugs, cords and outlets should be replaced or repaired by a certified electrician who is
properly qualified to meet local safety and electrical codes. Power supply cords should be replaced by the
manufacturer.
AVOID using extension cords or 3-prong adaptors.
7.
To reduce the risk of electrical shock or fire, MAKE SURE that your unit is properly grounded. NEVER
TAMPER WITH, REMOVE OR CUT THE GROUNDING PIN! The wall outlet used with this roller MUST be
properly grounded. If you do not have a grounded outlet, have one installed by a certified electrician who is
properly qualified to meet local safety and electrical codes.
8.
Make sure your machine is unplugged when you conduct any maintenance or repair. A qualified service
technician should always perform service or repair.
9.
This product is certified for household or commercial use.
10.
Do not cover the power cord. DO NOT immerse cord in water or use in high traffic areas. DO NOT run cord
over carpets or heating sources or elements. NEVER use with damaged cords or plugs.
11.
INTENDED FOR UPRIGHT, FREESTANDING USE ONLY. Do not install in cabinet or enclosed spaces.
12. DO NOT operate with missing or broken parts.
13. This product Is Intended for INDOOR USE ONLY. DO NOT USE OUTDOORS.
14.
Only qualified repair personnel should perform service. Service or maintenance performed by unqualified
personnel could result in injury.
15.
Do not operate this roller in explosive atmospheres, such as in the presence of flammable liquids, gases, or
dust.
16. DO NOT tamper with or modify the controls.
17.
KEEP UPRIGHT when transporting. DO NOT UPEND OR TURN UPSIDE DOWN.
All the safety devices must be checked before operation. Turn the machine off immediately when defects or
malfunctions are found. Contact Omcan Customer Service immediately at 1-800-465-0234.
1 YEAR PARTS AND LABOR WARRANTY
Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule a drop off to either
an Omcan authorized service depot in the area, or to an Omcan Service warehouse to repair the
equipment.
Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not
improper use.
Please see https://omcan.com/disclaimer for complete info.
