Omcan BS-VE-3200-S, Instruction Manual

Page: 6 / 24

6
Installation
Operation
Be sure to install the bandsaw in an easily accessible area with plenty of space.
Grounding wire must always be connected.
IMPORTANT: Check the tension of the blade by turning the handle clockwise before operating it.
BEFORE OPERATION
Check and make sure the machine is in a stable location. Wash with warm water and soap all the food-contact
parts, and wipe dry. To do it proceed as follows:
1. Switch the machine off and disconnect it from the power source.
2. Open the upper door and lower door by pulling the handle.
3. Loosen the blade turning the handle or calibrator (optional) clockwise and take it out from the upper and
lower wheels.
4. Take out the staples which are in front of the upper and lower wheels to be able to pull them out.
5. Assemble the components following the inverse steps.
IMPORTANT: The blade must be well calibrated. Use the handle turning it clockwise to get the right
tension of the blade. Keep the machine off to adjust the cutting regulator.
Technical Specifications
Model BS-VE-3200-S BS-VE-3200-T
Power 3 HP / 2.24 kW
Blade Length 126” / 3200mm
Blade Saw Dimensions 0.8” x 12.6” / 20 x 320mm
Cutting Capacity 15” x 18” / 381 x 457mm
Electrical 220V / 60 Hz / 1 Ph 220V / 60 Hz / 3 Ph
Amps 11A 9A
Weight 374 lbs. / 170 kgs.
Packaging Weight 415 lbs. / 188 kgs.
Packaging Dimensions 40” x 54” x 96” / 1016 x 1372 x 2438mm
Item Number 10272 18943