background image

9

Maintenance

CLEANING THE CONDENSER COIL

•  For efficient operation, it is important that the condenser surface be kept free of dust, dirt and lint.

•  We recommend cleaning the condenser coil and fins at least once per month.

•  Clean with a commercial condenser coil cleaner. Brush the condenser fins from top to bottom, not side to 

side.

•  After cleaning, straighten any bent condenser fins with a fin comb.

CLEANING THE FAN BLADES AND MOTOR

If necessary, clean the fan blades and motor with a soft cloth. If it is necessary to wash the fan blades, cover 

the fan motor to prevent moisture damage.

CLEANING THE INTERIOR OF THE UNIT

• 

When cleaning the cabinet interior, us a solvent of warm water and mild soap.

• 

Do not use steel wool, caustic soap, abrasive cleaners, or bleach that may damage the stainless steel 

surface.

• 

Wash door gaskets on a regular basis, preferably weekly. Simply remove door gasket from the frame of the 

Installation

INSTALL THE UNIT IN AN INDOOR, WELL VENTILATED AREA

•  Unit performs more efficiently in a well ventilated area.

• 

For best performance, please maintain a clearance of 4” from the back of the unit.

• 

Not to be used outdoors.

AVOID INSTALLATION IN A HIGH HUMIDITY AND/OR DUSTY AREA

•  Humidity can cause the unit to rust and decrease efficiency of the unit.

•  Dust collected on the condenser coil will cause the unit to malfunction. Clean the condenser at least once a 

month with a brush or clean cloth.

SELECT A LOCATION AWAY FROM HEAT AND MOISTURE-GENERATING EQUIPMENT

•  High ambient temperatures will cause the compressor to overwork, leading to higher energy bills and 

gradual breakdown of the unit.

ELECTRICAL

Please ensure that the required voltage of the compressor is being supplied at all times. Low or high voltage 

can detrimentally affect the refrigeration unit. All units should be plugged into a grounded a properly-sized 

electrical outlet with appropriate overcurrent protection. Please refer to the electrical requirements on the rating 

plate. Please make sure that your unit has its own dedicated outlet. Do not use an extension cord.

Summary of Contents for 59062

















Reviews: