9
Maintenance
CABINET CLEANING
The product should be cleaned once a week with the power supply disconnected. When cleaning please use a
mild cleansing agent. Only use a damp cloth.
CLEANING THE FILTER
When message “EE4” appears on the display, please clean the filter immediately. If the error message still
appears after cleaning the filter, please contact Omcan.
INSTRUCTIONS FOR CLEANING THE FILTER
1. Remove the four screws from the top of the front grill.
2. Pull out the front grill.
3.
Take out the filter.
CHECK FOR LEAKS
Observe all connectors and welding joints for oil stains. This indicates that there is a leak, please call Omcan if
you notice any oil stains.
ALWAYS OBSERVE THE OPERATION OF THE UNIT, IN THE EVENT OF ANY ABNORMAL SOUNDS
OR SMELLS, OR IF THE UNIT BEGINS TO SMOKE, DISCONNECT THE UNIT FROM THE POWER
Operation
FEATURES OF FUNCTION
• Small, integrated digital controller, which is applicable to the compressor of 1 Hp. Located behind the front
grill.
•
Main functions are: Temperature Display/Temperature Control/Manual-Automatic /Light Control/Value
Storing/Self-Testing/Parameter Locking.
FRONT PANEL OPERATION
1. Set temperature: Press button; set temperature will be displayed. Press or button to modify and
store the displayed value. Press button to exit the adjustment and display the cold-room temperature.
2. If no button is pressed within 10 seconds, the cold-room temperature will be displayed.
3.
Lighting: Press button to activate light in refrigerator; press again to turn off. Manual start/stop defrost:
Press button and hold for 6 seconds to either defrost or to stop defrost.
4. Refrigeration LED: During refrigeration, the LED is on. When the cold room temperature is constant, the
LED is off. During delay start, the LED flashes.
5.
Defrost LED: During defrosting, the LED is on. When it stops defrosting, the LED is off. During the delay of
defrost, the LED flashed.
