7
Installation
CONNECTING FRONT FRAME AND REAR FRAME
• First insert the rear frame front axle into the front frame hole and put the bearing between them.
Note: Dab grease where the Bearing is assembled.
• After adjusting the position, screw the nut for fixing.
• Assemble the damper on the two sides of the frame as shown in Figure 2.
SECOND VERSION AS SHOWN IN FIGURE 3 AND FIGURE 4
• Space all the parts as shown in Figure 3, and lock it.
Note: keep the knighthead and bottom border on the same level.
ASSEMBLE THE WHEEL SETS
If disc brakes are used:
• Assemble the fenders on the front frame as shown in Figure 3 and fix the fender clip.
• Put the front wheels on the two sides of front frame (bottom border) and use the safety hook and lock nut
for fixing.
• Assemble the disc brake on the brake fixing plate and lock it with screws and spacer as shown in Figure 4.
(Figure 5 is finished).
Note: Disc brake spacer can be chosen use or not use according to the distance between disc
brake disc and disc brake plate.
If roller brakes are used:
• Assemble the fenders on bottom border as shown in Figure 3 and fix the fender clip. And then attach the
roller brake onto the wheel hub with lock nut for fixing.
• Put the front wheels on the two sides of front frame (bottom border) and fixing the roller brake end at fixing
space. Adjust the brake and lock it with brake lock nut.
To assemble the imitated roller brake:
• Assemble the fenders on bottom border as shown in Figure 5 and fix the fender clip. And then attach the
imitated roller brake onto the wheel hub with lock nut for fixing as shown in Figure 9. Put the front wheels
on the two sides of front frame (bottom border) and fixing the imitated roller brake end at fixing space.
Adjust the brake and lock it with brake lock nut.
To assemble the V brake:
• Assemble the fenders on bottom border as shown in Figure 5 and fix the fender clip. Attach the V brake
onto the V brake seat and lock it with V brake fixing bolt, adjust the brake cable and fixing it.
To assemble the drum brake:
• Assemble the fenders on bottom border as shown in Figure 5 and fix the fender clip. Put the two front
wheels onto both sides of bottom border and fix the end of the drum brake on the drum brake fixing space,
lock it with the lock nut and safety hook. Adjust the brake cable and lock it shown in Figure 11.
Summary of Contents for 46659
Page 9: ...9 Figure Drawings...
Page 10: ...10 Figure Drawings...
