Omcan 46321, Instruction Manual

Page: 17 / 44

17
Operation
The heating elements start warming only when filling is finished. On the screens LCD1 & LCD2 the
current temperature of each tank is displayed alternately (when LCD 1 shows “bt” then LCD 2 displays
boiler’s temperature, when LCD 1 shows “tt”, then LCD 2 displays tank temperature). In case that the
wash tank’s heating resistance is ON, a dot in the right lower corner of LCD1 is lit, while in case that the
boiler’s heating resistance is ON a dot in the right lower corner of LCD2 is lit. For that reason, symbol
(representing the tank) is shown beneath of LCD1 & symbol (representing the boiler) is shown
beneath of LCD2.
• Wait 20 minutes in order both the tank and booster to be fully heated.
During the first full warming at the start of the swift the washing cycle does not start until the dishwasher
to be fully warmed
The full heating process is finished when both booster and tank temperatures are minimum 74°C.
• Load the basket in a proper way and place it inside the machine.