Omcan 44313, Instruction Manual

Page: 7 / 20

7
Operation
1. Assembly the filter pan and put appropriate amount of coffee on a filter paper
(between 50-60g).
2. Slide the filter pan into position.
3. Pour a pot of cool water into the water tank.
4. Place an empty decanter or pots at the correct position under filter pan.
5. Switch the power ON, the “Brewing” indicator lights up; a process of brewing
has begun.
6. Coffee start flows into the decanter or pots.
7. When “Brewing” indicator lights turn off, there is no more coffee flows out from
the unit; a brewing cycle has completed.
8. The warmer on the base will continue to heat up, until the user turn the switch
off.
9. For the unit without warmers, please turn power OFF, and lock the cap of pot
or thermos. A pot of coffee can now be served.
10. Although the machine has an overflow pipe in the reservoir, just in case the
amount of water in reservoir exceeds; the user still should be careful not let the
water exceeds 2.2 liter (2.3 QT) in order to avoid over flow.
11. Since there is always some remaining water in the hoses or boiler of the
machine; if the machine will not be used for some time, or if the machine
needs to be removed, please pour out the remaining water and clean it before
storage.
12. When the machine is to be used again after a long period, please repeat steps
of installation.
13. If the machine is not to be used for a short time, please clean the machine with fresh water before using
again.
14. When the warning indicator lights up, it reminds the user to de-scale in time.
Caution! Remove the brew chamber carefully and slowly when it hot!
Caution! Hot Surface!
DO NOT keep EMPTY decanter on warming plate.