8
Maintenance
•
Never block the air outlet and suction to keep the air circulation and refrigeration capability constant.
• Do not overfill refrigerator with food, as it will influence the cooling effect. If needed, adjust the rack height
for proper food storage.
•
Cool down hot food to room temperature before placing inside the refrigerator.
•
During power interruptions, reduce opening times and maintain cool temperature in refrigerator.
•
To avoid scalding, never touch the compressor.
•
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly
qualified persons in order to avoid hazard.
•
This appliance is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety.
•
Children should be supervised to ensure that they do not play with the appliance.
WARNING:
Keep ventilation openings clear of obstructions.
WARNING:
Do not use mechanical devices of other means to accelerate the defrosting process, other than
those recommended by the manufacturer.
WARNING:
Do not damage the refrigerant circuit.
WARNING:
Do not use electrical appliances inside the food storage compartments of the appliance, unless
they are of the type recommended by the manufacturer.
Troubleshooting
Trouble
Cause and Remedy
No Refrigeration
Is the plug fitting in the socket?
Is the fuse broken?
Is there no power?
Unsatisfactory Refrigeration
Is it under direct sunshine? Is there any heat source
nearby?
Is the surrounding ventilation poor?
Is the door closed? Is the door open for a long period
of time?
Is the door seal strip deformed or damaged?
Is there too much food?
Does food block the air suction or outlet?
Regulate the temperature controller.
Noisy
The refrigerator is not level.
The refrigerator contacts the wall or other matter.
There is loose part in refrigerator.
Contact Omcan for help if simple troubleshooting does not solve the problems.
