7
Installation
Operation
program the setting after five seconds. Now that you have programmed your time, you may press the “-” button
any time to start the timer. Once programmed, the timer will always default to the time setting until otherwise
changed.
PROGRAM USING COUNT-UP MODE
Your programmable timer allows you to program your time using count-up mode. This is convenient for when
you need to first measure the time required to grill your sandwich before programming. Once you have started
grilling, press the “+” button to start the timer. When you have finished grilling, press both “-” and “+” to set the
time. Once programmed, the timer will always default to this time setting until otherwise changed.
Note: When batteries are removed, the timer automatically defaults to the factory setting of 10
seconds.
BEFORE FIRST USE
Initial Burn-Off of Factory Sediments and Seasoning/Curing of Cast Iron Plates:
1. Place grill in a well-ventilated area under an exhaust hood.
2. Remove protective paper from grill surface.
3.
Plug grill in, turn thermostat knob to maximum setting and switch the unit ON with top grill plate in closed
position. This will dry off any remaining moisture and will burn off all factory sediments from grill and on grill
surfaces. The unit will visibly smoke as it continues the burn-off.
4.
When burn-off has completed (smoking has ceased), turn the unit OFF, open grill fully and allow to cool for
about an hour.
5.
Clean grill surface with cleaning brush using cleaning liquid and hot water. Rinse and dry thoroughly.
6. When unit has cooled, apply a very thin, even layer of shortening, fat or lard to the surface of the top and
bottom grill plates.
NOTE: Liquid vegetable oil can also be used, but should first dry to the surface before cleaning the
cast iron plate thoroughly is advised. Warm up the cast iron plate for 10 minutes until all smoke
and/or odor has dissipated. Switch off and unplug the unit, then use warm, soapy water to clean.
NEVER USE COLD WATER ON THE HOT PLATE.
Always preheat the grill before use until the ready light illuminates.
Lift the top grill plate, arrange food on the bottom plate and bring top plate back down to make contact with
food and begin cooking. If additional sandwiches are desired, lower the lid to preserve the heat while you
prepare the additional sandwiches. When not cooking, the thermostat is turned off, switch off the on/off switch,
unplug the unit.
