9
Maintenance
Troubleshooting
Malfunctions
Reason
Solution
The machine does not work after
plugging in and pressing the green
button.
Power line faulty.
Check wiring, troubleshooting.
Poor access to power outlets and
plugs.
Check sockets and plugs, replace
them if necessary.
Over-current protection switch
jump (motor is turned on or rotating
body due to motor problems lead
to over-current protection to open
without work).
Check the motor and rotating
device; if it works well then replace
the over-current protection button.
False installment and use.
Check rotating device, maintain or
update.
Time failure or loosening of screw. Check the time, tighten it if it
loosens and replace it if it is
broken.
Motor coil burnout.
Check whether the motor coil are
broken, please replace them if
broken.
1.
Have Omcan authorized service technicians remove the marinating roller.
2. Use a mild, odorless cleanser to clean the inner side of the marinating roller.
3. The user must rinse the roller after using the cleanser.
Attention:
1. Do not rinse the machine with water jets.
2. After cleaning, the user must remove excess water from the cart to prevent any malfunction of the machine.
3. If there is any issues, please check the Troubleshooting section below and have the machine examined by
professional staff.
Note:
If the oil level is low, please remove the side board and add oil in the vacuum pump up to the max line using
100# Vacuum Oil.
