7
Operation
Maintenance
CLEANING
1. Turn OFF the machine and disconnect it from power source.
2. Wait until the abrasive plate is completely still.
3. To lift the abrasive plate out of the cylinder, hold it and pull it up.
4. Wash the machine and the plate with water and neutral soap.
5. To reassemble plate proceed inversely being sure of placing it back on the central shaft pin correctly.
For a fast cleaning, just turn the machine ON without load and let it work with running water.
REFERENCE
Item Number Model Number
Description
Manufacturer Model Number
13443
PE-BR-0010
Peeler Potato 22 lb / 10 kg 0.5 HP / 373 W
110V/60/1 cQPSus
DB10
Check if products are peeled looking through the transparent lid. To remove peeled product from inside the
chamber close faucet, place a container under the discharge door and open it, so that the peeled potatoes are
discharged from the chamber under the action of centrifugal force applied by the peeling disc.
IMPORTANT
Under no circumstances touch the Abrasive Disc when it is in moving. Secure the lid, open the water tap,
set the timer and activate the ON/OFF switch. With the machine on and with water falling at the center of the
abrasive disc, pour the product to be processed inside it. For the PE-BR-0010, put 10 Kg of potatoes at most.
The working time varies from one to five minutes. If the potatoes are being peeled to irregularly, it is possible
to observe the process through the lid opening. The PE-BR-0010 is designed to process normal shaped
potatoes, any other vegetable with irregular shape will need a manual finishing even after processing. To
remove the peeled product, keep the machine running, shut down the water and open the Door by pulling the
lock upwards. Lift it until the side lock and keep the door open. This way the product will be expelled. To close
the door, release the side lock by pulling it sideways.