background image

6

Model

MM-IT-0030

MM-IT-0050

MM-IT-0050-110V

Power

1 HP / 0.75 kW

1.5 HP / 1.12 kW

Working Capacity

66.1 lbs. / 30 kgs.

110.2 lbs. / 50 kgs.

Tank Volume

40 L / 42.3 QT

73 L / 77 QT

Electrical

110V / 60Hz / 1

220V / 60Hz / 1

110V / 60Hz / 1

Weight

88 lbs. / 39.9 kgs.

169.8 lbs. / 77 kgs.

Packaging Weight

108 lbs. / 48.9 kgs.

205 lbs. / 93 kgs.

Dimensions

14.2” x 28.4” x 22.4”

360” x 720 x 570mm

18.9” x 31.5” x 42.1”

480 x 800 x 1070mm

Item Number

37459

13159

47094

Technical Specifications

Operation

IMPORTANT

Before starting, make sure that the power supply corresponds to that shown on the rating plate placed on the 

unit.

PRELIMINARY OPERATIONS

ATTENTION

The disassembling of the kneading paddle mounted inside the tank can be made only when the first scraper 

of the paddle (near the side of the tank where is the geared-motor unit) is positioned in vertical position and in 

the lower part. If the machine was stopped with the first scraper in different position and the operation of the 

paddle disassembling is to be performed, press the button INDIETRO to obtain little rotations (step by step) up 

to reaching the correct position.

•  Put the machine on a flat and stable surface. If the machine isn’t stable, adjust the feet.

•  To disassemble the kneading paddle from the tank, the paddle must be sustained with an hand while the 

other hand turns clockwise the handwheel till the pivot gets out from the paddle.

•  Unthread the paddle from the tank by bringing it in the back part.

Safety and Warranty

waste) according to the current norms.

DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!

Summary of Contents for 13159

















Reviews: