8
Installation
Operation
Maintenance
- Controls that are either not working or broken.
- Missing items or other problems.
Please advise the courier, Omcan and service center immediately.
Carefully dispose of packaging components as required by the local standards.
DO NOT DISPERSE THE PACKAGING MATERIALS IN THE ENVIRONMENT.
CORRECT USE
The knife grinder is intended only for sharpening non-serrated knifes. Serrated blades and blades without
handles must not be sharpened.
USING THE MACHINE
•
Wash the blades before grinding.
• Place the equipment on a well leveled, smooth, dry and stable surface.
•
Turn the knob, located on the side, to adjust the distance of the grinding wheels, depending on whether
there are knives with small or large blades. In this way, it is possible to adjust the angle of the sharpening.
•
Place the blade between the two wheels and slide the blade.
•
Slide the blade back and forth between the stones without pressing to obtain a professionally sharpened
blade in a few seconds. The sharpening time depends on the wear of the knife edge.
•
Repeat all of the previous operations on the next blade.
• Wash the blade after finishing the sharpening process.
•
The motor can work for a maximum of 8-10 minutes, after this period of time, the motor must rest for 1 hour
and 30 minutes in order to cool down.
The grinder does not require any special maintenance. To clean the machine body, use only a damp cloth. Do
not spray with water.
