background image

6

Technical Specifications

Installation

The juice extractor must be installed on a flat, non-skid work surface with a maximum recommended height 

of 85 cm. This equipment is equipped with a three pin electric cable. All pins must be connected before 

the machine is turned on. This ensures the machine is properly grounded. Check if the machine voltage 

corresponds with the power source.

Model

JE-BR-1750

Horsepower

0.25

RPM

1750

Output/Minute

3 L / 3.25 QT

Electrical

110V/60/1

Weight

14.77 lbs. / 6.7 kgs.

Dimensions (DWH)

8.26” x 8.26” x 13.38” / 210 x 210 x 340mm

Item Number

10865

Operation

PRE-OPERATION

Check if the machine is stable and that there is no movement s on the supporting surface. Wash all food 

contact parts with hot water and neutral soap. Check if crown is properly fitted. Place sieve (Pic. 1, #7) inside  

the juice vessel (Pic. 1, #8) and put it below output opening (Pic. 1, #2). The extractor is now ready to operate.

IMPORTANT

Always disconnect the unit from power source before changing the crown. Place the crown on motor shaft and 

make sure it is properly fitted. To start operating, press the black push-button switch to the ON position. How to 

feed the machine:

1. 

The juice extractors work very quickly, therefore they should be equally fed.

2. 

First of all cut fruit in two halves. With one hand, hold the cut fruit and press it down firmly against the 

crown #9 or #10 (Pic. 1).

3. 

The juice will flow to the vessel through the chamber and the sieve.

Summary of Contents for 10865













Reviews: