6
Technical Specifications
The cutter is started and stopped by means of a button connected to an auxiliary control circuit preventing
accidental startup after an outage.
Model
FP-IT-0003
Horsepower
0.4 HP
Capacity
2.8 L / 3 QT
Electrical
110V/60/1
Weight
28 lbs. / 12.7 kgs.
Dimensions
21” x 10” x 11.5” / 533 x 254 x 292mm
Item Number
10830
Maintenance
For good mincing performances, the blades must be sharp. If necessary, have them sharpened by a
specialized person. This machine does not require any further lubrication. Should the machine make any
unusual noise after a certain period of time, this may be due to a loosening of the belt. Screw the belt-tightener
on the side of the motor under the base.
Installation
Operation
Place the machine on a suitably plane, smooth and dry surface sufficiently strong to support the machine
weight. Install near an outlet complying to local regulations.
Before completing the connections, check that the mains correspond to the data shown on the plate.
•
To start the machine, press the green button.
•
Insert the food to mince through the special opening on the lid.
•
Take into account that prolonged use will mash the products.
•
After completion, open the lid by turning the knob on the horizontal bar by ¼ turn to the left, and pull up the
bar.
•
Take the blade holding pin away then remove the vessel from its seat.
