PAGE
15
PREPARING THE MACHINE
After the test is done open the door and
install the abrasive tube as shown on the
picture. Ensure that the tube is
completely inserted in the cutting unit.
Afterwards follow the same test process
as before.
As soon as you can see abrasive (sand
particles) moving in the tube you can
stop the test.
Next place your material in the machine
and secure it using the clamps from the
side. Ensure the clamps are only located
at the edges.
Then move the cutting unit using the
arrow keys on the computer to your
desired starting position
i.e. the starting point in your file.
Be careful not to crash.
Using the [Zero] buttons on the left you
can set your [Home] and [Start] position.