Omarv TFR 180, Use And Maintenance Manual, Page: 36 / 39

36
GOING GOING GOING GOING ONTO ONTO ONTO ONTO THE THE THE THE ROAD ROAD ROAD ROAD
1.
before beginning work check all the nuts and bolts and then again after
the first 50 working hours
2. correctly connect the machine to the tyractor
3. check that the PTO running speed is at 540 or 1000 rpm
4. insert the PTO with a slow running speed, with the wheels resting on the
ground and the machine horizontal
5. go freward by a few metres and check the cutting height. adjust if
necessary
CAUTION CAUTION CAUTION CAUTION
!!!! All the greasing, lubrication, maintenance, repair, parts substitution,
setting onto the road operations must be carried out slowly with the greatest
care in compliance with the safetu regulations of this manual. failire to respect
event one of these regulations may cause seroius injury or death to the operator
or the accompanying personnel.