27
-Service Menu;
-When the device is off, the service menu is accessed by pressing and holding the
button for 5 seconds.
-When in the service menu, it is possible to switch between parameters with the help of
the
buttons next to the temperature screen. Parameter value range is
adjusted with the help of
buttons next to the time display.
-Press the
button to exit without saving the change in the parameter menu, and the
button to exit by saving.
Parameter
Explanation
Min Value Max Value
Unit
Factory settings
Hysteresis
PCB temperature
−
−
−
Temperature Display Unit
−
Thermocouple Type
Selection
−
Maximum Set Temperature
to be Adjusted
Maximum To Be
Adjusted
Time
Minute
Table 1: Service Parameters
-Device Error Codes;
−−
Phase Reading Error:
Check the energy connection of the device.
−−
Thermocouple Reading Error:
Check the thermocouple.
−−
Thermocouple Connection Error:
Check the thermocouple connections.
−−
Relay Board Temperature Error:
Relay board temperature needs to be lowered.
