![background image](http://html.mh-extra.com/html/olympus/xz-2/xz-2_instruction-manual_734956084.webp)
84 EN
Information
7
FlashAir or Eye-Fi card
#
Cautions
• “FlashAir” SD cards have built-in wireless LAN and cannot be formatted. Use the software
supplied with the FlashAir card to format the card.
• Use the FlashAir or Eye-Fi card in compliance with the laws and regulations of the country
where the camera is used. Remove the FlashAir or Eye-Fi card from the camera or
disable the card functions in airplanes and other locations where use is prohibited.
g
[Eye-Fi] (P. 91)
• The FlashAir or Eye-Fi card may become hot during use.
• When using a FlashAir or Eye-Fi card, the battery may run out faster.
• When using a FlashAir or Eye-Fi card, the camera may function more slowly.
SD/SDHC/SDXC card write-protect switch
The SD/SDHC/SDXC card body has a write-protect switch. If you set the
switch to the “LOCK” side, you will not be able to write to the card, delete
data or format. Return the switch to enable writing.
LOCK
Format card
Cards must be formatted with this camera before fi rst use or after being used with other
cameras or computers.
Checking the image saving location
The memory indicator shows whether the internal memory or card is being used during
shooting and playback.
Current memory indicator
v
: Internal memory is being used
w
: Card is being used
#
Cautions
• Performing [Card setup]/[Memory setup], [Erase], [Sel. Image] or [All Erase] may not
completely erase all card data. When disposing of the card, damage the card to prevent
the disclosure of personal data.
Readout/recording process of the card
During shooting, the icon (
v
/
w
)
fl ashes while the camera is writing data. Never open the
battery/card compartment cover or unplug the USB cable. This can not only damage the
image data but also render the internal memory or card unusable.
Summary of Contents for XZ-2
Page 101: ......
Page 102: ...VM576101 ...