E-19
Check the loading status.
Always perform the following final checks before sealing the Case.
• Has the digital camera been loaded so that the zoom lever operates
properly?
• Has the silica gel been inserted all the way at the specified position?
• Has the O-ring at the Case opening part been installed properly?
• Are the O-ring and the O-ring contact surface on the front lid free of dirt
and other foreign matter?
Seal the Case.
When the rear lid is closed (quietly, so that the O-ring will not come out of
the groove), the buckles are engaged with the edge of the rear lid, and the
buckle lock levers are pushed down in arrow direction, the Case will be
sealed airtight.
:
• The buckle opening lever must be pushed down in arrow
direction and the protector must be sealed.
When the buckle is not closed, the protector is not sealed
and water leakage is caused.
CAUTION
When the buckle stopper is
lowered in arrow direction
after the protector has
been sealed, the buckle is
locked and operation of the
buckle opening lever
becomes impossible.
PT-015̲英 2003.5.1 4:37 PM ページ 20 (1,1)
