![background image](http://html.mh-extra.com/html/olympus/vh-520/vh-520_instruction-manual_734933016.webp)
16 EN
Taking pictures with [Auto]
Taking pictures with [Auto]
1
Select [Auto] in the submenu, and use
HI
to
select the angle of view (STD: 180°, FULL: 360°)
and then press the
A
button.
2
Point the camera to the start position.
3
Press the shutter button to begin shooting.
Guide
AUTO
FULL
MENU
Cancel
OK
Save
4
Start panning. When the arrow reaches the end of
the guide, recording ends automatically.
●
The camera automatically processes the
images and the combined panorama image is
displayed.
●
To stop shooting in the middle, press the
shutter button or
A
button. If the camera
pauses for a while, shooting automatically
fi
nishes.
●
If the message “Image was not created.” is
displayed, shoot again.
●
To cancel the panorama function, press the
button.
●
If the shutter does not automatically release, try
[PC].
Taking pictures with [PC]
Taking pictures with [PC]
1
Use
FGHI
to specify at which edge the next
picture is to be connected, and then press the
A
button.
Direction for
combining frames
2
Press the shutter button to take the
fi
rst frame.
The edge of the
fi
rst frame is displayed faintly on
the screen.
3
Compose the next shot so that the edge of the
fi
rst frame displayed faintly on the screen overlaps
the subject of the second frame, and press the
shutter button.
4
Repeat step
3
until the desired number of frames
are taken, and then press the
A
button or
button when
fi
nished.
Panorama shooting is possible for up to 10 frames.
The shot images are combined into a single
panorama image by the PC software.
●
For details on installing the PC software, refer
to (p. 40). In addition, refer to the PC software
help guide for details on how to make panorama
images.
Summary of Contents for VH-520
Page 67: ......
Page 68: ...VM956301 ...