6
Troubleshooting
31
EN
Troubleshooting
Problem
Alarm
message
Possible cause
Solution
The display is
blank.
-
The batteries are not inserted
properly.
Check that the positive and
negative terminals of the
batteries are placed correctly
(
☞
P.6).
LO
The remaining battery power
is low.
Replace the batteries (
☞
-
The power is OFF.
Turn the power ON (
☞
P.7).
Unable to operate
the voice recorder.
LO
The remaining battery power
is low.
Replace the batteries (
☞
-
The power is OFF.
Turn the power ON (
☞
P.7).
HOLD
The voice recorder is in HOLD
mode.
Release HOLD mode (
☞
P.10).
Unable to record.
FULL
There is no remaining memory.
Erase unnecessary files
(
☞
FULL
The maximum number of
recordable files (199) has been
reached.
Erase unnecessary files
(
☞
Playback is
inaudible.
-
The earphones are connected to
the
q
jack.
To output the playback through
the built-in speaker, disconnect
the earphones.
-
The volume is set to [00].
Adjust the volume (
☞
P.15).
The recording is
too quiet.
-
The output level of the
connected external device may
be too low.
Adjust the output level of the
external device.
Missing audio file.
NO FILE
The file was recorded in a
different folder.
Select another folder.
Other information