Coded function system
4
2
System diagram
Coded illuminator
Control box for coded function
Note 3)
U-CBS
Microscope
frame
·
The connectors of U-CBS are equipped with dust covers. Remove the dust covers only from the
connectors you want to connect cables.
·
Be sure to connect only the units specified by Olympus to the connecters of U-CBS.
If a non-specified unit is connected, the performance of the entire system cannot be guaranteed.
·
Before connecting the cables, be sure to set the POWER switch of U-CBS to OFF (out position).
Insert the cables securely to connectors paying attention to their shapes. If the connector is provided
with clamping screws, be sure to tighten them.
·
If you insert a non-specified connector into the connector of U-CBS, the connector may be damaged.
CAUTION
· PC
· Microscope digital camera
Note 4)
Cable for coded illuminator
Note 2)
RS-232C cable
Note 1)
AC adapter
Cable for interface for coded nosepiece
Note 2)
Interface for coded nosepiece
U-IFRES
Hand switch
U-HSEXP
Control box
BX3-CBM
Coded revolving
nosepiece
Cable for revolving
nosepiece
Interface cable
CBSIFCBL200
