Olympus u 1200, Basic Manual

Page: 14 / 148

14
En
1
Press
2
Y
.
2
Press
12
to select [
Y
ON], and press
e
.
3
Press the shutter button fully to take the picture.
The self-timer lamp lights for approximately 10 seconds after
the shutter button is pressed, then starts blinking. After
blinking for approximately 2 seconds, the picture is taken.
1
Press
3
#
.
2
Press
12
to select the flash mode, and press
e
.
3
Press the shutter button halfway.
When the flash is set to fire, the
#
mark lights.
4
Press the shutter button completely to take the picture.
To save battery power, the camera automatically enters sleep mode and stops
operating if not used for 3 minutes in shooting mode. Press the shutter button
or zoom button to reactivate the camera.
If the camera is not operated for 12 minutes after the camera enters sleep
mode, it automatically retracts the lens and turns off. To resume operation, turn
on the power again.
Icon Flash Mode Description
No
indication
Auto flash The flash fires automatically in low light or backlight
conditions.
!
Red-eye
reduction flash The red-eye reduction flash mode significantly reduces
this phenomenon by emitting pre-flashes before firing
the regular flash.
#
Fill-in flash The flash fires regardless of the available light.
$
Flash off The flash does not fire.
Self-Timer
Self-Timer Lamp
Flash Modes
Power Save Feature
d4351_basic_e_04_menu_7.fm Page 14 Tuesday, July 3, 2007 12:52 PM