![background image](http://html2.mh-extra.com/html/olympus/tg-1/tg-1_instruction-manual_4307404052.webp)
52 EN
Displaying the current altitude/water
Displaying the current altitude/water
depth (atmospheric/hydraulic pressure)
depth (atmospheric/hydraulic pressure)
[Manometer]
[Manometer]
d
(Settings Menu 3)
Tough Settings
Manometer
The readings may have a margin of error depending
on meteorological conditions. Use the readings only
for your reference.
Submenu 2
Submenu 3
Application
Manometer
Off
Cancels the manometer
display.
On
Displays the current
altitude/water depth
(atmospheric/hydraulic
pressure) in the shooting
standby mode screen.
(–12 m to 5,000 m)
Calibrate
Proceed to the setting
screen. See below.
When set to [On], a warning message appears in the
monitor as a water depth close to 10 m (32.8 ft) is
reached.
To adjust the altitude/water depth display
To adjust the altitude/water depth display
1
Use
FG
to select the current altitude/water depth,
and press the
A
button to set.
MENU
1200m
1200m
Calibrate
Back
Setting the units of elevation, depth,
Setting the units of elevation, depth,
etc. [m/ft settings]
etc. [m/ft settings]
d
(Settings Menu 3)
Tough Settings
m/ft settings
Submenu 2
Submenu 3
Application
m/ft settings
m
This displays in meters.
ft
This displays in feet.
Operating the camera by tapping the
Operating the camera by tapping the
body [Tap Control]
body [Tap Control]
d
(Settings Menu 3)
Tough Settings
Tap Control
Submenu 2
Submenu 3
Application
Tap Control
Off
Cancels [Tap Control].
On
[Tap Control] is activated.
Calibrate
Adjusts the tap strength
and intervals between
multiple taps on each side
of the camera body. (top,
left, right, & back)
Operating during shooting mode
Operating during shooting mode
(Example: Flash mode)
(Example: Flash mode)
1
Tap the right or left side of the camera body once.
●
The fl ash mode selection screen is displayed.
2
Tap the right or left side of the camera body to select a
function.
Summary of Contents for TG-1
Page 88: ......
Page 89: ...VM297601...