23
SZX16
9-2 Revolving Nosepiece SZX2-2RE16
Fig. 27
}The revolving nosepiece allows two objectives to be mounted (deviation in focusing due to switching between the
objectives can be minimized provided that both of them are of the PF series). This makes objective switching easy by
simply rotating the revolving nosepiece and expands the range of observation magnifications.
1
External View
Nosepiece mount
Hand guard
Allen wrench
(for M3 screws)
Objective mounts
Clamping screws
(M3, 6 mm long, x 4)
2
Assembly
(Figs. 27 to 29)
1. Remove the observation tube from the zoom microscope body.
2. Remove the zoom microscope body and focusing assembly from the
pillar, and place them upside down on a flat desk surface.
# Place a soft sheet made of rubber or similar material on the desk
surface.
3. Remove the objective from the zoom microscope body and then remove
the objective mount ² by loosening the three clamping screws @ using
the provided Allen wrench (for M3 screws). (Fig. 27)
@
²
Summary of Contents for SZX16
Page 35: ......
