![background image](http://html2.mh-extra.com/html/olympus/stylus-1000/stylus-1000_advanced-manual_4287407052.webp)
52
EN
Get
ting
to
kn
ow yo
ur c
a
mera
bet
te
r
Be sure to hold the camera firmly with both hands and press the shutter button slowly so as to avoid
moving the camera. To stabilize the digital image, take pictures with the
h
/
/
<
pressed and
set the mode dial to
h
.
The digital images are not stabilized when:
• images are shot at a high-magnification zoom setting, i.e. using both optical zoom and
digital zoom functions,
• the object is dark and the shutter speed is slow, or
• scene modes where the flash is turned off and/or the shutter speed is slow.
The flash is activated automatically when there is insufficient light, or when the camera is shaken.
To take pictures with no flash in dark places, set the flash mode to [
$
] and set as follows:
Set the camera to
h
mode
g
“
h
/
/
<
button Shooting pictures using image stabilizer/Editing images/
Printing pictures” (P. 14)
Increase the [ISO] setting
g
“ISO Changing the ISO sensitivity” (P. 21)
There are several factors that can cause the picture to appear grainy.
Using the digital zoom to take close-up pictures
• With the digital zoom, part of the image is cropped and enlarged. The greater the
magnification, the grainier the picture appears.
g
“DIGITAL ZOOM Zooming in on your subject” (P. 21)
Increasing the ISO sensitivity
• When you increase the [ISO] setting, “noise”, which appears as spots of unwanted color
or unevenness in the color, can be introduced and give the picture a grainy appearance.
This camera is equipped with a function to allow shooting at high sensitivity while
suppressing noise; however, increasing the ISO sensitivity can result in some noise,
depending on the shooting conditions.
g
“ISO Changing the ISO sensitivity” (P. 21)
• The reason why there are sometimes differences between the actual colors and the
colors recorded in a picture is related to the light source illuminating the subject. [WB] is
the function that helps the camera determine the true colors. Normally, the [AUTO]
setting provides the optimal white balance, but depending on the subject, results may be
better if you manually adjust the [WB] setting.
• When the subject is in the shade on a sunny day
• When the subject is illuminated by both natural light and indoor lighting, such as when
near a window
• When there is no white in the center of the frame
g
“WB Adjusting the color of a picture” (P. 20)
Prevent blur by using image stabilization
Taking stabilized pictures without the flash
The picture is too grainy
Taking pictures with the correct color
Summary of Contents for Stylus 1000
Page 80: ......