Olympus Stylus 1, Instruction Manual, Page: 62 / 133

62 EN
Using W
i-Fi function
7
7
Using the wireless LAN functions on the camera, you can share images (viewing
images, and transferring images between the camera and smartphone) and operate
the camera connecting to a smartphone with Wi-Fi connectivity.
To use this function, you must have the relevant app installed on the smartphone.
http://olympuspen.com/OIShare/
#
Cautions
• Before using the wireless LAN function, read “Precautions when using the wireless
LAN function” (P. 114).
• If using the wireless LAN function in a country outside the region where the camera
was purchased, there is a risk that the camera will not conform to the wireless
communication regulations of that country. Olympus will not be held responsible for
any failure to meet such regulations.
• As with any wireless communication, there is always a risk of interception by a third
party.
• The wireless LAN function on the camera cannot be used to connect to a home or
public access point.
Setting up a wireless LAN connection
(Wi-Fi Settings)
To use the wireless LAN functions on the camera (P. 64), you need to make setting such
as the password to be used when connecting.
[Private] and [One-Time] for a one-time connection are available
.
Setting password selection method
1
Select [Wi-Fi Settings] in the d Setup Menu and press
Q
.
2
Select [Wi-Fi Connect Settings] and press
I
.
3
Select the wireless LAN connection method and press
Q
.
• [Private]: Connect using a preset password.
• [One-Time]: Connect using a different password each time.
• [Select]: Select which method to use each time.
• [Off]: The Wi-Fi function is turned off.
Changing private connection password
Change the password used for [Private].
1
Select [Wi-Fi Settings] in the d Setup Menu and press
Q
.
2
Select [Private Password] and press
I
.
3
Follow the operation guide and press the
G
button.
• A new password will be set.
Using Wi-Fi function