Olympus STM7-AF, Instructions Manual

Page: 6 / 12

2
Laser beam path A
Laser beam path B
Class 1 IEC60825-1:2007
Class 1 IEC60825-1:2014
Laser beam path A: Below 1 μW
Laser beam path B: 200 μW Maximum
Do not use the device in close proximity to the sources of strong electromagnetic radiation.
Proper operation may be interfered. The electromagnetic environment should be evaluated prior to operation of the
device.
Be sure to turn OFF the power of the device before connecting /disconnecting cables and units.
This device is designed for use in Class A industrial environment for IEC61326-1 International Standard concerning EMC.
Using it in a domestic environment may cause radio interference.
This device complies with the emission and immunity requirements described in IEC61326 series.
1. This unit uses a laser diode (wavelength 775-800 nm) for autofocusing. It is designed to be safe by reducing the
laser power (Class 1), but never remove the cover, etc.
Class 1 Laser Product (IEC60825-1: 2007 / IEC60825-1:2014)
Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to
Laser Notice No.50, dated June 24, 2007.
2. The laser output of this unit does not exceed the maximum permissible exposure (MPE) level, and this unit is a
Class 1 laser product.
* MPE is the level of laser radiation to which a person may be exposed without hazardous effect on or adverse
biological changes in the eye or skin.
Laser beam radiation position and power
This product irradiates the laser beam from the positions illustrated below.
CAUTION - Electric safety -
CAUTION - Laser safety -
Use of controls or adjustments or performance of procedures other than those specified here in may result in
hazardous radiation exposure.