Olympus STF-8, Instructions Manual

Page: 20 / 172

20
EN
5
Slide the latch on the controller
in the direction opposite to that
indicated by the [LOCK
► ] icon
(
1
).
6
Attach the controller to the
camera’s hot shoe (
2
).
• Insert it
fi
rmly all the way into the hot
shoe until it clicks into place.
7
Slide the latch to the [LOCK ► ]
position (
3
).
3
2
1
8
Install each light-emitting part in its
respective joint.
• Insert it
fi
rmly all the way into the joint
until it clicks into place.
• When removing the light-emitting part,
pull it out while pressing the UNLOCK
button.
This completes the installation.