10-004209-01EN [Q7750159], Rev. 2, May 2018
Troubleshooting
207
6.2.2
Reset Parameters
If the system parameters become corrupt or a change is made that prevents the system
from functioning properly. All system parameters may be restored to their factory
settings by selecting this option. When pressing the
Reset Params
button, the changes
occur immediately. Power will need to be cycled for the reset to be complete (see
Figure 6-5 on page 207).
Figure 6
‑
5 The Cycle Power screen—Reset Parameters
6.2.3
System Parameters
System parameters are factory set to control a variety of functions. These parameters
cannot be modified. However, special circumstances may occur when modification of
these parameters could be recommended by Olympus.
Instructions for making changes to the system parameters will only be provided when
deemed necessary by Olympus.
6.2.4
Device Address
Each device type in the system is factory assigned a unique identifier. This option
allows for these identifiers to be changed in the field. Instructions for making changes
to the system parameters will only be provided when deemed necessary by Olympus.
Summary of Contents for SteerROVER
