![background image](http://html2.mh-extra.com/html/olympus/sp-700/sp-700_advanced-manual_4298847108.webp)
Setting the date and time in another time zone (DUAL TIME SETUP)
108
6
Setti
ng
s
2
Press
ON
to set the year, and
press
Y
to move to the month
setting.
• To move back to the previous setting,
press
X
.
• The first two digits of the year are fixed.
3
Repeat this procedure until the
date and time are completely set.
• The time is displayed in the 24-hour format. Consequently, 2 p.m. is
displayed as 14:00.
4
Press
Z
.
• For a more accurate setting, press
Z
when the time signal hits 00 seconds.
This function allows you to set a date and time in another time zone (dual
time), separate from the settings in [
X
]. After setting, you can switch
between the new setting and the time set in [
X
].
Top menu
[MODE MENU]
[SETUP]
[DUAL TIME SETUP]
g
“Using the menus” (P. 19)
Note
• The date and time settings will be returned to the factory default settings if the
camera is left without the battery for approximately 1 day. The settings will be
canceled more quickly if the battery was only loaded in the camera for a short
time before being removed. Before taking important pictures, check that the
date and time settings are correct.
20
0
5 . 01 . 01
00 : 00
OK
SELECT
GO
SET
Setting the date and time in another time
zone (DUAL TIME SETUP)