E-15
Prepare the camera.
Which digital cameras can be used?
This Case (PT-029) can only be used with the Stylus 600/µ DIGITAL
600 camera.
Turn on the camera.
Press the digital camera’s POWER ON/OFF button to turn it ON.
The camera goes into the standby mode when it hasn’t been
operated for about 3 minutes. Pressing any button (such as the
zoom button) cancels the standby mode. If the camera is left for
about 15 minutes without being operated, the power switches OFF
completely to save battery power. In this case, the camera can be
turned ON by pressing the POWER ON/OFF button.
Check camera operation.
Confirm camera operation as described in the camera’s operation
manual. After completing the check, press the camera’s power
switch to turn it off.
Open the Case.
Use the provided O-ring remover as described below.
Insert the hook section below the buckle lock/unlock lever.
Slowly pull the O-ring remover.
If the O-ring remover is not available, push the buckle lock/unlock
lever from the left and right with your thumb and index finger, and
pull up the lever gently.
PT029̲E.qxd 2005.8.4 11:50 AM ページE-15
