EN 42
EN
2. Advance check of the Case
Advance check before use
Depending on the carrying and storage conditions, the maintenance
status, etc., the waterproof function may be damaged.
Before using, always perform the following advance checks.
If the advance test should show water leakage with normal handling, stop
using the Case and contact your dealer or an Olympus service station.
Remove the O-ring
Open the Case and remove the O-ring.
Procedure
1
Insert the O-ring remover into the gap between the O-ring and O-ring
groove wall.
2
Bring the tip of the inserted O-ring remover below the O-ring. (Be
careful not to damage the groove with the tip of the O-ring remover.)
3
Lift the O-ring, pinch it with your fi ngertips and pull it out of the Case.
