EN 25
EN
5. Handling After Shooting
Wash the Case with pure water
1
After use, clean the protector thoroughly with pure water as soon as
possible.
After use in sea water, soak it in pure water for a fixed time (30 minutes
to an hour) to remove any salt.
2
Operate the shutter lever and various buttons of the product in pure
water to clean and remove the salt attached to the shaft.
3
Take it out of the water and rinse with pure water.
Wipe off any waterdrop
Remove any drops of water from the case. Use air or a soft cloth not
leaving any fibers to thoroughly wipe any waterdrop from the joint between
the front and rear lid, the palm grip, the open/close dial and other
operating parts.
CAUTION:
• Do not disassemble for cleaning.
• Drying the Case with salt adhered may impair the function. Always wash
off any salt after use.
CAUTION:
When waterdrops remain between the front and the rear lid, they may
spill to the inside when the Case is opened. Take special care to wipe
off all waterdrops.
PT-056_EN.book Page 25 Thursday, February 13, 2014 11:12 AM
