EN 5
En
Setting the underwater shooting scene mode
z
The SP-550UZ/SP-560UZ camera incorporate several shooting scene
modes for underwater shooting, including wide-angle and macro modes.
Simply select the mode that’s most appropriate for the scene you are
shooting.
For details, see “5. Underwater Shooting According to the Scene
Type” (P.28) of this manual.
z
For details on mode setting, refer to the digital camera’s operation
manual.
For Prevention of Water Leakage Accidents
When water leakage occurs while this product is being used, repair of the
camera housed in this product may become impossible. Please observe
the following cautions for use.
1
When sealing this product, make sure that no hairs, fibers, sand
particles or other foreign matter stick not only to the O-ring, but also to
the contact surface. Even a single hair or a single grain of sand may
cause water leakage. Please check with special care.
2
The O-ring is a consumable part. Please replace it at least once a year
with a new one. Before each use, perform the proper maintenance.
3
Deterioration of the O-ring will acelerate according to the use conditions
and the storage conditions. Immediately replace the O-ring with a new
one if it is damaged, cracked, or has lost its elasticity.
4
During O-ring maintenance, clean the inside of the O-ring groove and
confirm the absence of dirt, dust, sand, and other foreign matter.
Examples of foreign matter sticking to the O-ring
Hair
Fibers
Grains of sand
PT037_EN.book Page 5 Monday, August 6, 2007 10:48 AM
