E-8
Fitting the mode dial knob ....................................................E-22
Insertion of silica gel ............................................................E-22
Check the loading status. ........................................................ E-23
Seal the Case...........................................................................E-23
Install the special balance weight.............................................E-24
Installation and Removal of the LCD Hood ..............................E-24
Installation ............................................................................E-24
Removal................................................................................E-24
Mounting and Removing the Lens Cap ....................................E-25
Perform the final checks. ........................................................ E-25
Visual Inspection ..................................................................E-25
Setting the camera power to ON and OFF. ..........................E-25
Try to move the mode dial. .................................................. E-25
Final Test ................................................................................E-26
4. Taking Pictures Under Water
....................................
E-27
How to Use the Hand Strap ....................................................E-27
Take pictures carefully. .......................................................... E-27
Confirm the picture on the LCD monitor. ..............................E-27
Quietly press the shutter lever. ............................................ E-27
Caution when using the flash................................................E-27
5. Handling After Shooting
..............................................
E-28
Wipe off any waterdrop. ..........................................................E-28
Take out the digital camera. .................................................... E-29
Wash the Case with pure water. ............................................ E-30
Dry the Case. .......................................................................... E-30
6. Maintaining the Waterproof Function
....................
E-31
Remove the O-ring. ..................................................................E-31
Remove any sand, dirt, etc. .................................................... E-31
Install the O-ring. .................................................................... E-32
How to Apply Grease to the O-ring ..........................................E-32
Maintenance of the threaded sections on the
TTL cable and TTL cable connector ........................................E-33
Maintenance of the TTL Connector Cap ..................................E-33
Replace consumable products. .............................................. E-34
7. Appendix
..........................................................................
E-35
Q & A on the use of the PT-023 ..............................................E-35
After-sale Service ....................................................................E-40
Specifications ..........................................................................E-41
Diver's Insurance Guide ..........................................................E-41
PT̲023JE̲E4.0.qxd 2004.11.2 9:48 AM ページE-8
