![background image](http://html.mh-extra.com/html/olympus/pen-f/pen-f_instruction-manual_734681029.webp)
29
EN
Shooting
2
Choosing aperture and shutter speed (
M
manual mode)
Mode
M
is a shooting mode where you choose both the aperture and shutter speed.
Bulb, time, and live composite photography are also available.
Rotate the mode dial
to
M
, and then use the front dial to select aperture value and the rear dial to select shutter
speed.
Difference from correct
exposure
250
250 F5.6
01:02:03
01:02:03
38
38
L
N
M
ISO
400
S-IS AUTO
S-IS AUTO
Wi-Fi
FHD
F
60
P
+0.3
+0.3
• When [AUTO] is selected for [ISO], exposure compensation can be adjusted using the
exposure compensation dial. [All] must
fi
rst be selected for [ISO-Auto].
g
[ISO-Auto] (P. 109)
Difference between exposure setting and
exposure with exposure compensation
Exposure compensation
250
250 F5.6
01:02:03
01:02:03
38
38
L
N
M
S-IS AUTO
S-IS AUTO
Wi-Fi
FHD
F
60
P
+0.3
+0.3
ISO-A
400
ISO-A
400
• The exposure determined by the aperture value and shutter speed you have set, and the
difference relative to a suitable exposure measured by the camera are displayed on the
monitor.
• Shutter speed can be set to values between 1/8000 and 60 seconds or to [BULB] or
[LIVE TIME], or [LIVECOMP].
• If you change the aperture value and shutter speed, the display on the monitor (or
view
fi
nder) will not change. To display the image as it is going to be shot, set [Live View
Boost] (P. 107) in Custom Menu.
• Even when you have set [Noise Reduct.], noise and/or light spots may still be noticeable
in the image displayed on the monitor and shot images under certain environmental
conditions (temperature etc.) and camera settings.
Noise in images
While shooting at slow shutter speeds, noise may appear on screen. These phenomena
occur when the temperature rises in the image pickup device or image pickup device
internal drive circuit, causing current to be generated in those sections of the image pickup
device that are not normally exposed to light. This can also occur when shooting with a
high ISO setting in a high-temperature environment. To reduce this noise, the camera
activates the noise reduction function.
g
[Noise Reduct.] (P. 108 )
Summary of Contents for PEN-F
Page 7: ...7 EN Table of Contents SAFETY PRECAUTIONS 169 SAFETY PRECAUTIONS 169 Index 179 ...
Page 19: ...19 EN Preparation 1 ...
Page 183: ......
Page 184: ...WC964501 date of issue 2015 11 ...