Preparation
1
18
EN
Charging the Battery
1
Co
nfirm that the
ON/OFF
lever
is in the
OFF
position.
2
Check that the battery is in the camera, and connect the USB cable and
USB-AC adapter.
1
2
3
AC outlet
USB-AC adapter (supplied)
USB cable
(supplied)
Micro-USB connector
•
Never use cable other than the USB cable supplied or specified by our company
(P. 172). This may cause smoking or burning.
• The
CHARGE
lamp light during charging. Charging
takes about 4 hours. The lamp goes out as the
batteries reach full charge.
• Even if charging is in progress, it stops when the
camera is turned on.
• The USB-AC adapter cannot be used to charge the battery when the camera is on.
• If a charging error occurs, the
CHARGE
lamp will blink. Disconnect and reconnect the
USB cable.
• The USB-AC adapter can be used to charge the battery when the battery temperature is
between 0 and 40 °C (32 and 104 °F).
• A charger (BCS-5: sold separately) can be used to charge the battery.
%
• For safety reasons, charging may take longer, or the battery may not reach full charge,
when the battery is charged in a high-temperature environment.
•
The batteries will not charge while the camera is off if pictures are being uploaded to a
smartphone via Wi-Fi (background auto upload).
g