Olympus OM-3Ti, Instructions Manual

Page: 109 / 112

SPECIFICATIONS
Type: Mechanical shutter 35mm SLR camera.
Film format: 24mm x 36mm.
Lens mount: Olympus OM mount.
Shutter: Mechanically controlled cloth focal plane shutter
(horizontal action).
Light metering method: Center-weighted average light
metering, switchable to spot metering; spot metering
selectable in 3 modes — multi-spot, highlight-based
and shadow-based methods.
Light metering range: 0 EV - 19 EV (ISO 100, 50mm
F1.2).
Shutter speed range: B.1 ~ 1/2000 sec. (mechanically
controlled).
Flash exposure control: TTL AUTO FLASH (OTF auto
flash) mode: OTF auto flash emission (with T-Series
or F280 flash) — synchronizes with 1/60 sec. or
slower shutter speed. Super FP emission (with F280
flash) — synchronizes with 1/60 ~ 1/2000 sec. X
mode: Super FP emission (with F280 flash) —
synchronizes with 1/60 ~ 1/2000 sec. Manual (with T-
Series or F280 flash) — synchronizes with 1/60 sec.
or slower shutter speed.
Connection to flash: Hot shoe (X contact, equipped with
Super FP contract terminal); 5-pin connector for T-
Series flash; synchro socket.
Film speed: ISO 6 ~3200.
Film advance: Film advance lever with 130° angle for
one long or several short strokes and pre-advance
angle 30°; motor drive and winder usable.
Viewfinder: With dioptric correction; dioptric correction
range +1.0 ~ -3.0 diopters; interchangeable focusing
screens; microprism/split image-matte type screen
standardized; finder view field: 97% of actual picture
field; magnification 0.84X at infinity with -0.5 diop.
and 50mm lens.
Viewfinder information: LCD multi-mode display
(60-sec. limiter); built-in illuminator (10-sec. limiter).
Battery check: 3-level display with LED and alarm
sound.
Power source: Two silver oxide batteries SR44, two
alkaline manganese batteries LR44 or one lithium
battery CR-1/3N.
Camera back: Removable hinge type, with memo holder;
interchangeable with Recordata Back 4
Dimensions: 136 x 84 x 50 mm
(5.4 x 3.3 x 2.0 in.) (body alone).
Weight: 510 g (18 oz.) (body alone).
SPECIFICATIONS, DESIGN AND ACCESSORIES ARE
SUBJECT TO CHANGE WITHOUT ANY NOTICE OR
OBLIGATION ON THE PART OF THE
MANUFACTURER.
108