S
yst
e
m
S
e
tu
p
5
5.15
Setup of the “ZOOM MODE” Menu
69
5
Press “
v
” or “
V
” to select either “OFF” or “ON,”
and press the “ENTER” button (see Figure 5.20).
Figure 5.20
5.15
Setup of the “ZOOM
MODE” Menu
This item is used to set the print layout when the HDTV
signal is input to this instrument and 4 multi-picture
images are to be printed.
CAUTION
Depending on the image capturing range, the characters
on the endoscopic image (patient data, recording device
counter, comment, etc.) may not be printed.
If patient data is not printed, be careful not to mix up
printed pictures between different patients.
NOTES
• If “ZOOM PART” is set as “PART” or “ALL,” since
the image is electronically magnified, depending on
the setup of equipment, the printed picture may be
blurred.
• The aspect ratio of either “4 : 3” or “5 : 4” is available
when “PART” or “ALL” is selected in “ZOOM
PART.”
To display the “ZOOM MODE” menu
1
Press the “MENU” button to initiate the menu
display.
2
Press “
v
” or “
V
” to select “ZOOM SETUP,” and
press the “ENTER” button.
3
Press “
b
” or “
B
” to display the “ZOOM MODE”
menu (see Figure 5.21).
Figure 5.21
Setting “ZOOM PART”
1
Press “
v
” or “
V
” to select “ZOOM PART,” and
press the “ENTER” button.
RESIZE TO FIT “ON”
Image capturing range
RESIZE TO FIT “OFF”