Op
er
at
ion
4
4.2
Control From the Front Panel
42
Capturing the Image
Images to be printed on print sheets can be captured in
this instrument as described below.
1
Display the image from the input source on the
monitor.
2
When the desired image is displayed, press the
“CAPTURE” button (see Figure 4.9).
Figure 4.9
NOTE
When the desired image is displayed, it is
recommended to turn it into a still image using the
freeze function to capture and print the image
without blur. For how to freeze an image, refer to
the instruction manual for the connected
equipment.
Checking a Captured Image
You can check a captured image on the monitor.
1
Press the “SOURCE/MEMORY” button (see
Figure 4.10).
Figure 4.10
2
Confirm that the Source/Memory display shows
“M.” If not, press the “SOURCE/MEMORY”
button until “M” is displayed.
“M” indicates that a memory image is being
displayed (see Figure 4.11).
“S” indicates that a source image is being
displayed.
Figure 4.11
Moving the Pointer
The pointer in which the memory position storing a
picture is movable.
1
Press “
v
,” “
V
,” “
b
,” or “
B
” while the normal
screen is displayed to move the cursor.
Pressing “
v
,” “
V
,” “
b
,” or “
B
” while the normal
screen is displayed moves a pointer in the same
direction as the direction that a cursor keys shows.
Printing
Print the images captured as follows.
CAUTION
• Do not turn OFF or take out the paper tray while
printing is in progress. Otherwise, paper jam and/or
malfunction may result.
• Do not open the front door or take out the paper tray
while printing is in progress. Otherwise, paper jam
and/or malfunction may result.
CAPTURE button
SOURCE/MEMORY button
Monitor
Source/Memory display
LCD panel
Source/Memory display