Olympus nortec 600, User Manual, Page: 63 / 374

DMTA-10040-01EN, Rev. E, February 2018
Software User Interface 53
Figure 2 ‑ 5 The NORTEC 600 f ront panel and main inspection screen
The real-time readings bar displays user-configurable readings (measurements) [see
Figure 2-5 on page 53]. It can display a maximum of two real-time readings from
among the available choices. The real-time readings bar can be set to display one or
two readings, or it can be disabled. For more information, see “Displaying Real-Time
Readings” on page 56.
The instrument settings are displayed on the right hand side of the main screen. The
displayed settings information can change, depending on the menu key that is
pressed. The menu keys are the five keys located at the bottom of the front panel:
MAIN FILTER ( ), DISP ( ), ALARM ( ), MEM ( ), and ADV SETUP
( ), as shown in Figure 2-5 on page 53.
The microSD memory card can be inserted into a slot that is located behind the I/O
door on the right-hand side of the instrument (see Figure 1-23 on page 44). Depending
on the context and on the available functions and options, various indicators and
numeric values appear on the screen and around the main measurement value (see
Figure 2-5 on page 53).
Direct-function
keys
Function keys
Real-time readings bar
Menu keys
Quick-access bar
Operation menu
(instrument settings)
FULL NEXT key