DMTA-10040-01EN, Rev. E, February 2018
Chapter 4
104
Figure 4
‑
21 The PASSWORD menu
The
PASSWORD
function is accessed as follows:
(1) Press the ADV SETUP menu key (
) twice.
(2) Press the A key.
The password is set as follows:
(1) Press the FULL/NEXT key to navigate to the item to protect with a
password:
FILE MENU
or
RESETS MENU
.
(2) Press the FULL/NEXT key to navigate to the text editor.
(3) Rotate the knob to select the characters of the password. When finished,
press the A key to
ACCEPT
.
(4) Press the FULL/NEXT key to navigate to another item to protect with a
password, and repeat steps 1 through 3 above, or press
to exit.
SYSTEM SETUP
Used to configure the NORTEC 600 instrument’s language, date, time, display
brightness, and other settings (see Figure 4-22 on page 105; for more details, see
“Initial Setup” on page 63). Here you can also select the application screen that
appears when the instrument starts up (see “Selecting the Startup Screen” on
page 67).
Summary of Contents for nortec 600
