![background image](http://html1.mh-extra.com/html/olympus/is-2dlx/is-2dlx_instructions-manual_4286542072.webp)
Symptom
The subjects' eyes
appear red in
printed pictures.
The subject was
within the frame of
the viewfinder, but
its edges are
missing on the print.
The film is scratched
The picture is
out of focus.
The picture is too
dark.
Cause
This "red-eye phenomenon" occurs with
all cameras when a flash is used. It is
caused by light from the flash reflecting
off retina at the back of the eye. Red-eye
varies depending on the individual and
the shooting conditions such as ambient
lighting. It is also more likely to occur
when using 135mm telephoto than when
using wide-angle focal lengths.
When a negative is enlarged, sometimes
the edge of the frame is not printed.
Film particles have accumulated along
the path that the film follows as it is
wound due to extended use of the camera
The camera moved when the shutter
release button was pressed.
The viewfinder's autofocus frame was
not positioned on the subject.
The subject was out of the working
range of the flash.
The subject was backlit.
Remedy
Use the Auto-S Flash mode to
significantly reduce red-eye
phenomenon.
Leave some room on the edges of
the frame when you compose
your shots.
Clean the inside of the camera.
Hold the camera correctly, and
press the shutter release button
gently.
Position the autofocus frame on
the subject, or use the focus lock.
Shoot within the working range
of the flash.
Set the flash to Fill-In mode.
See
p.25
p.10
p.20
p.24
p.26
Problems with Printed Pictures
72
Summary of Contents for IS-2DLX
Page 21: ......
Page 65: ...Picture Area 65...