![background image](http://html1.mh-extra.com/html/olympus/im027/im027_instruction-manual_734546308.webp)
308
EN
Information
10
Functions that cannot be selected from menus
When you open the menu, items that cannot be set are displayed in gray.
If you press the
Q
button while selecting a gray item, the reason it cannot be set will be
displayed.
Refer to the on-screen instructions and check the settings (P. 65).
Functions that cannot be set from the super control panel
Some functions may be unavailable depending on the current shooting settings. Check if the
same function is displayed in gray in the menus (P. 65).
The subject appears distorted
The following functions use an electronic shutter:
movie recording (P. 59), silent mode (P. 132), Pro Capture shooting (P. 133), High
Res Shot (P. 156), focus bracketing (P. 178), focus stacking (P. 160), the live ND filter
This may cause distortion if the subject is moving rapidly or the camera is moved abruptly.
Avoid moving the camera abruptly during shooting or use standard sequential shooting.
Lines appear in photographs
The following functions use an electronic shutter, which may result in lines due to flicker and
other phenomena associated with fluorescent and LED lighting, an effect that can sometimes
be reduced by choosing slower shutter speeds:
movie recording (P. 59), silent mode (P. 132), Pro Capture shooting (P. 133), High
Res Shot (P. 156), focus bracketing (P. 178), focus stacking (P. 160), the live ND filter
Flicker can be reduced by choosing slower shutter speeds. You can also reduce flicker using
flicker scan.
g
[
K
Flicker Scan], [
n
Only the subject is displayed and no information is shown
The display has been switched to [Image Only]. Press the
INFO
button and switch to
another display mode.
Focus mode cannot be changed from MF (manual focus)
The lens you are using may be equipped with the MF clutch mechanism. In this case, manual
focus is selected when the focus ring is slid to the camera body side. Check the lens.
g
Nothing is displayed on the monitor
When something, e.g. your face, hand or strap, comes close to the viewfinder, the monitor
turns off and the viewfinder turns on.
g