44 EN
Recording and using logs (LOG mode)
While the LOG switch is in the
LOG
position, the camera will log GPS
and other sensor data (P. 78). Logs can be downloaded for use with the
OLYMPUS Image Track (OI.Track) smartphone app.
Recording and saving logs
Rotate the LOG switch to
LOG
.
• Logging will start. The indicator lamp will blink
while logging is in progress.
• Data acquisition and logging will end automatically when the battery runs low.
Rotate the LOG switch to
OFF
to save the log.
• In LOG mode, the camera draws on the battery continuously to acquire
location data.
• No data can be added to the log once the memory allocated to temporary log
storage is full, in which case you will need to rotate the LOG switch to
OFF
to
save the log to the memory card.
g
“Log recording problems” (P. 95)
Saving logs
The current log is saved to the card when the LOG switch is rotated to
OFF
.
• A message is displayed in the monitor while the log is being saved. Do not
remove the memory card until the message has cleared from the display.
Removing the memory card while the log is being saved could cause loss of
the log file or camera or memory card malfunction.
• The camera may not begin saving the log to the memory card when the LOG
switch is rotated to
OFF
if, for example, wireless data transfer is in progress or
the memory card is full or write-protected, in which case you should terminate
wireless data transfer, delete unwanted data from the card, or otherwise
enable the log to be saved. Do not remove the battery from the camera until
the log has been saved.
• The log will not be saved if no memory card is inserted.
• Each card can store up to 199 log files. An error message will be displayed
when the log file count approaches this number (P. 93). Should this occur, insert
another card or delete log files after copying them to a computer.
• Log files are recorded to the “GPSLOG” and “SNSLOG” folders on the card
(P. 101).
Summary of Contents for IM005
Page 133: ......
Page 134: ...WD277701 date of issue 2017 04...
