![background image](http://html1.mh-extra.com/html/olympus/i-speed/i-speed_instructions-manual_4284800013.webp)
Nomenclature & Functions
i--SPEED
11
6.
Ethernet Connector
Used for software updates if newer software becomes available.
7.
SVGA Connector
This connector provides a SVGA signal which contains the
video image and overlay graphics. This signal is a copy of the
CDU image. The output standard is the 60Hz SVGA PC video
signal and the connector conforms to the PC video 15 pin D--sub
standard. As a result, this signal may be fed directly to a PC
monitor, (CRT or LCD) and provides the best quality live
analogue video signal available from the camera.
8.
PCMCIA Slot
The camera is able to operate a PCMCIA flash memory. The
standard used is the ATA FLASH standard and the card may be
either 3V3 or 5V. It is also possible to use a Compact Flash card
with the supplied PCMCIA adapter and this is recommended if
larger memory sizes are required. Once the card is inserted it
must be pressed firmly in place and may be ejected by pressing
the button at the bottom of the slot. It is not necessary to switch
power on and off as the card is inserted and removed, but care
must be taken not to remove the card while writing, deleting or
formatting is in progress.