DMTA020-01EN, Rev. D, September 2016
Setting Up and Operating the HST-X04 Scanner
13
1.2.2
Installing a Probe Holder
To install a probe holder
1.
On top of the holder, unscrew the wing screw enough to loosen the bar socket (see
Figure 1-3 on page 13).
Figure 1-3 Loosening the bar socket
2.
Move the probe holder on the bar to the desired position and screw the wing
screw tight enough to hold the probe holder in place.
1.2.3
Installing an Encoder
The Mini-Wheel encoder (see Figure 1-4 on page 14) can be installed two different
ways according to the scanning direction needed.
Wing screw
Summary of Contents for HST-X04
